 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTD4904N Power MOSFET Features 30 V, 79 A, Single N-Channel, DPAK/IPAK * * * * Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These are Pb-Free Devices http://onsemi.com V(BR)DSS 30 V RDS(on) MAX 3.7 mW @ 10 V 5.5 mW @ 4.5 V D ID MAX 79 A Applications * CPU Power Delivery * DC-DC Converters MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current (RqJA) (Note 1) Power Dissipation (RqJA) (Note 1) Continuous Drain Current (RqJA) (Note 2) Power Dissipation (RqJA) (Note 2) Continuous Drain Current (RqJC) (Note 1) Power Dissipation (RqJC) (Note 1) Pulsed Drain Current tp=10ms Current Limited by Package TA = 25C TA = 100C TA = 25C TA = 25C Steady State TA = 100C TA = 25C TC = 25C TC = 100C TC = 25C TA = 25C TA = 25C PD IDM IDmaxPkg TJ, Tstg IS dV/dt EAS PD ID PD ID Symbol VDSS VGS ID Value 30 "20 17.8 12.6 2.6 13 9.2 1.4 79 56 52 316 90 -55 to 175 47 6.0 68.4 W A A C A V/ns mJ W A W A Unit V V A G S 4 4 12 N-Channel 4 3 1 CASE 369AA DPAK (Bent Lead) STYLE 2 2 3 CASE 369AD CASE 369D IPAK IPAK (Straight Lead) (Straight Lead DPAK) 23 1 MARKING DIAGRAMS & PIN ASSIGNMENTS 4 Drain YWW 49 04NG 4 Drain YWW 49 04NG 4 Drain Operating Junction and Storage Temperature Source Current (Body Diode) Drain to Source dV/dt Single Pulse Drain-to-Source Avalanche Energy (TJ = 25C, VDD = 50 V, VGS = 10 V, L = 0.1 mH, IL(pk) = 37 A, RG = 25 W) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) 2 1 23 1 Drain 3 Gate Source Gate Drain Source 1 2 3 Gate Drain Source Y WW 4904N G = Year = Work Week = Device Code = Pb-Free Package TL 260 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. (c) Semiconductor Components Industries, LLC, 2009 June, 2009 - Rev. 0 1 Publication Order Number: NTD4904N/D YWW 49 04NG NTD4904N THERMAL RESISTANCE MAXIMUM RATINGS Parameter Junction-to-Case (Drain) Junction-to-Tab (Drain) Junction-to-Ambient - Steady State (Note 1) Junction-to-Ambient - Steady State (Note 2) 1. Surface-mounted on FR4 board using 1 in sq pad size, 1 oz Cu. 2. Surface-mounted on FR4 board using the minimum recommended pad size. Symbol RqJC RqJC-TAB RqJA RqJA Value 2.9 4.3 57 108 Unit C/W ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Parameter OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage Drain-to-Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-to-Source Leakage Current ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain-to-Source On Resistance VGS(TH) VGS(TH)/TJ RDS(on) VGS = 10 V VGS = 4.5 V Forward Transconductance CHARGES AND CAPACITANCES Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Threshold Gate Charge Gate-to-Source Charge Gate-to-Drain Charge Total Gate Charge SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(on) tr td(off) tf td(on) tr td(off) tf VGS = 10 V, VDS = 15 V, ID = 15 A, RG = 3.0 W VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W 15.3 19.8 23.4 7.5 10.3 20 28.7 8.0 ns ns Ciss Coss Crss QG(TOT) QG(TH) QGS QGD QG(TOT) VGS = 10 V, VDS = 15 V, ID = 30 A VGS = 4.5 V, VDS = 15 V, ID = 30 A 3052 VGS = 0 V, f = 1.0 MHz, VDS = 15 V 976 23 16.8 4.4 8.2 3.0 41 nC nC pF gFS ID = 30 A ID = 15 A ID = 30 A ID = 15 A VDS = 1.5 V, ID = 30 A VGS = VDS, ID = 250 mA 1.0 1.6 4.0 3.0 3.0 4.0 4.0 76 S 5.5 3.7 2.2 V mV/C mW V(BR)DSS V(BR)DSS/TJ IDSS IGSS VGS = 0 V, VDS = 24 V TJ = 25C TJ = 125C VGS = 0 V, ID = 250 mA 30 15 1.0 10 "100 nA V mV/C mA Symbol Test Condition Min Typ Max Unit VDS = 0 V, VGS = "20 V 3. Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTD4904N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Parameter DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD tRR ta tb QRR LS LD LD LG RG TA = 25C VGS = 0 V, dIs/dt= 100 A/ms, IS = 30 A VGS = 0 V, IS = 30 A TJ = 25C TJ = 125C 0.84 0.7 40.4 20.5 19.9 35 nC ns 1.1 V Symbol Test Condition Min Typ Max Unit Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Time PACKAGE PARASITIC VALUES Source Inductance (Note 5) Drain Inductance, DPAK Drain Inductance, IPAK (Note 5) Gate Inductance (Note 5) Gate Resistance 5. Assume terminal length of 110 mils. 2.48 0.0164 1.88 4.9 1.0 2.0 nH W http://onsemi.com 3 NTD4904N TYPICAL PERFORMANCE CURVES 130 120 110 100 90 80 70 60 50 40 30 20 10 0 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10 V 3.8 V to 6 V TJ = 25C 3.6 V 3.4 V 3.2 V 3.0 V 2.8 V 2.6 V 2.4 V ID, DRAIN CURRENT (AMPS) VDS 10 V ID, DRAIN CURRENT (AMPS) TJ = 125C TJ = 25C TJ = -55C 2 2.5 3 3.5 4 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 0 1 2 3 4 5 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 1. On-Region Characteristics RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0.012 0.010 0.008 0.006 0.004 0.002 RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0.006 Figure 2. Transfer Characteristics ID = 30 A TJ = 25C TJ = 25C 0.005 VGS = 4.5 V 0.004 VGS = 10 V 0.003 3 4 5 6 7 8 9 10 0.002 20 40 60 80 100 120 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance vs. Gate-to-Source Voltage RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 -50 -25 10 0 25 50 75 100 125 150 175 5 10,000 ID = 30 A VGS = 10 V IDSS, LEAKAGE (nA) 1000 Figure 4. On-Resistance vs. Drain Current and Gate Voltage VGS = 0 V TJ = 150C TJ = 125C 100 TJ = 85C 10 15 20 25 30 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Drain Voltage http://onsemi.com 4 NTD4904N TYPICAL PERFORMANCE CURVES 3600 3200 C, CAPACITANCE (pF) 2800 2400 2000 1600 1200 800 400 0 0 5 10 Crss 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Coss Ciss 12 11 10 9 8 7 6 5 4 3 2 1 0 QGS VGS QGD VDD = 15 V VGS = 10 V ID = 30 A TJ = 25C 0 5 20 25 10 15 30 35 QG, TOTAL GATE CHARGE (nC) 40 45 TJ = 25C VGS = 0 V VGS , GATE-TO-SOURCE VOLTAGE (VOLTS) QT Figure 7. Capacitance Variation Figure 8. Gate-To-Source and Drain-To-Source Voltage vs. Total Charge 30 td(off) tf tr td(on) IS, SOURCE CURRENT (AMPS) VGS = 0 V 25 20 15 10 5 0 0.4 TJ = 25C 0.8 0.9 0.5 0.6 0.7 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) 1.0 TJ = 125C 1000 VDD = 15 V ID = 15 A VGS = 10 V t, TIME (ns) 100 10 1 1 10 RG, GATE RESISTANCE (OHMS) 100 Figure 9. Resistive Switching Time Variation vs. Gate Resistance EAS, SINGLE PULSE DRAIN-TO-SOURCE AVALANCHE ENERGY (mJ) 1000 I D, DRAIN CURRENT (AMPS) 70 60 50 40 30 20 10 0 25 Figure 10. Diode Forward Voltage vs. Current ID = 37 A 100 10 ms 100 ms 10 1 VGS = 10 V SINGLE PULSE TC = 25C RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.1 1 ms 10 ms dc 0.1 1 10 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 100 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) 175 Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 NTD4904N TYPICAL PERFORMANCE CURVES 100 50% (DUTY CYCLE) 20% 10% 5.0% 2.0% 1.0% 10 R(t) (C/W) 1.0 0.1 SINGLE PULSE 0.01 PSi TAB-A 0.001 0.000001 0.00001 0.0001 0.001 0.01 PULSE TIME (s) 0.1 1.0 10 100 1000 Figure 13. FET Thermal Response 110 100 90 80 70 GFS (S) 60 50 40 30 20 10 0 0 VDS = 1.5 V 10 20 30 40 50 60 ID (A) 70 80 90 100 Figure 14. GFS vs ID ORDERING INFORMATION Order Number NTD4904NT4G NTD4904N-1G NTD4904N-35G Package DPAK (Pb-Free) IPAK (Pb-Free) IPAK Trimmed Lead (Pb-Free) Shipping 2500 / Tape & Reel 75 Units / Rail 75 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 6 NTD4904N PACKAGE DIMENSIONS DPAK CASE 369AA-01 ISSUE A -T- B V R 4 SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.025 0.035 0.018 0.024 0.030 0.045 0.386 0.410 0.018 0.023 0.090 BSC 0.180 0.215 0.024 0.040 0.020 --- 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.63 0.89 0.46 0.61 0.77 1.14 9.80 10.40 0.46 0.58 2.29 BSC 4.57 5.45 0.60 1.01 0.51 --- 0.89 1.27 3.93 --- C E S A 1 2 3 Z H U F L D 2 PL J DIM A B C D E F H J L R S U V Z 0.13 (0.005) M T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 NTD4904N PACKAGE DIMENSIONS IPAK (STRAIGHT LEAD DPAK) CASE 369D-01 ISSUE B E Z DIM A B C D E F G H J K R S V Z B V R 4 C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 --- S -T- SEATING PLANE A 1 2 3 K F D G 3 PL J H M 0.13 (0.005) T STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN E L2 E3 3.5 MM IPAK, STRAIGHT LEAD CASE 369AD-01 ISSUE O A A1 E2 L1 D L b1 2X D2 NOTES: 1.. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2.. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30mm FROM TERMINAL TIP. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD GATE OR MOLD FLASH. DIM A A1 A2 b b1 D D2 E E2 E3 e L L1 L2 MILLIMETERS MIN MAX 2.19 2.38 0.46 0.60 0.87 1.10 0.69 0.89 0.77 1.10 5.97 6.22 4.80 --- 6.35 6.73 4.70 --- 4.45 5.46 2.28 BSC 3.40 3.60 --- 2.10 0.89 1.27 T SEATING PLANE A1 A2 3X e b 0.13 M E2 D2 T OPTIONAL CONSTRUCTION ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 8 NTD4904N/D |
Price & Availability of NTD4904N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |